Product User Guide

Upon Receiving Your Janos Product

  1. Visually examine the lens for any damage during shipping.
  2. If the product is damaged upon receipt, please notify Janos Technology Immediately. See Product Returns for more details.

Warning:
Never Touch Surface Of The Lens



Cam Pin
Required for the inner barrel to rotate and move in and out
for focus. User should NOT use the threaded hole to lock
down focus.
Release Pin – Once lens is properly interfaced
with the bayonet mount, the release pin must be depressed to
rotate the lens and remove it from the mount by pulling lens
away from the camera.

Bayonet Interface – The Bayonet “teeth”
on the lens will align with the opening of the Bayonet mount.
Press the lens into the Bayonet mount, and rotate until the
lens locks into place.

Manual Focus Adjust – By rotating the barrel,
the inner barrel will move in and out. Rotating clockwise will
move the barrel out, and will allow you to focus in on objects
closer to the camera. Rotating counter clockwise will move the
barrel in, and will reach the infinity focus location. All lenses
are designed to focus “beyond infinity” to ensure
that you reach the infinity focus location.